Improvement of Technology of Liquefaction of Gray Cast Iron Alloy

Saidmakhamadov Nosir; Turakhodjaev Nodir; Abdullaev Kamol; Khasanov Jamshidbek; Tadjiev Nuritdin

Improvement of Technology of Liquefaction of Gray Cast Iron Alloy

Authors

Saidmakhamadov Nosir PhD candidate, Tashkent state technical university, University Street 2, Tashkent, Uzbekistan
Turakhodjaev Nodir
Abdullaev Kamol docent, Namangan engineering – construction institute, Islam Karimov Street 12, Namangan
Khasanov Jamshidbek PhD student, Andijan Machine – Building Institute, Bobur Shox Avenue 56,
Tadjiev Nuritdin researcher, Tashkent state technical university, University Street 2, Tashkent, Uzbekistan

Keywords:

ferrous metals, gray cast iron, sand

Abstract

In the article, the technology of liquefaction of thin – walled lifting window detail was developed and summarized. Due to the lack of a model of the lifting sunroof detail, the lifting sunroof detail was first cast in a special vacuum box mold from duralumin alloy using a combustible model. Then it was poured into a sand – clay mold from Ch 24 cast iron alloy. The chemical composition and microstructure of the poured sample were examined using a scanning electron microscope. As a result, a quality cast product was obtained.

Downloads

Published

2022-08-20

How to Cite

Saidmakhamadov Nosir, Turakhodjaev Nodir, Abdullaev Kamol, Khasanov Jamshidbek, & Tadjiev Nuritdin. (2022). Improvement of Technology of Liquefaction of Gray Cast Iron Alloy. Global Scientific Review, 6, 19–28. Retrieved from http://scienticreview.com/index.php/gsr/article/view/40